KVA Engineering

"During December 2007, KVA's installation crew removed a large dust collection unit and completely moved the unit to the next building over. This included moving the large Steelcraft Dust Collector, 40 HP main fan and related components. KVA Engineering guaranteed that the system would be removed on Friday and set back up and ready to process wood dust the following Monday morning. This involved attention to details and good coordination for all the parties involved.

KVA Engineering's installation crew worked diligently through the weekend and all was ready to go. The electrician also worked closely with KVA's project manager to ensure all electrical wiring was ready to go.

I can count on KVA's expertise to get the job done, done on-time and to a standard that I accepted."

- John T. Ellis

Bealka Casting, located in Wisconsin has equipment that generates a large volumes of dust. Being a foundry, they have shot blasters, sand blasters, polishing equipment, sanders, grinders, all generating dust. They had dust collection, but it was inadequate to maintain a safe and healthy work environment for their employees.

Bealka needed to upgrade their system and stay in their budget!

KVA Engineering had a solution. KVA was able to supply a used dust collector large enough to handle their existing needs plus dust collection needs in the future at an investment that met their budget.

Custom cyclone design for wood grinding system. The cyclone was designed for large wood chips to be separated out. The exhaust off the top of the cyclone went down into an after filter section where the air was cleaned to 99.9% efficiency.

Large wood working plant needed a 35,000 CFM system for moulders and routers producing large wood chips. KVA Engineering supplied and installed a highly successful high volume wood working dust collection system for this plant.

Down draft tables custom designed for cabinet plant. Tables are hooked to main dust collection system to pull the fine sanding dust out of the air and send it to the central dust collection unit.

Rubber trim dust collection system for manufacturer of boots and shoes. Rubber dust and chips are pulled into the cyclone system. The air is cleaned to 90% efficiency and returned back into the plant to a filter bag section to be cleaned to 99.9% efficiency and then the air is returned back to plant air.

KVA Engineering supplied a 50,000 CFM used woodworking dust collection system to aspirate the complete plant. KVA Engineering supplied and installed a complete system including automatic summer/winter dampers, spark detection system, and pneumatic take-away system.

KVA Engineering completely installed a wood dust filter system for Young Blood Lumber in Minneapolis, MN. KVA did the complete install including demolishing a building and erecting a storage silo and a 20,000 CFM filter system. The system also included a silo unloader to semi-truck, spark detection system, and pneumatic conveying system.